Setra model230 low cost wet/wet differential pressuer | Applications- Fuel Cells
- Energy Management Systems
- Pump Speed Control
- Filter Condition Monitoring
- Process Control
- Refrigeration Equipment
- HVAC
|
| Model 230 Specifications | | Electrical Output Voltage | 0 to 5 VDC
0 to 10 VDC | | Electrical Output Current | 4 to 20 mA | Accuracy
(RSS Method) | ±0.25% Full Scale | | Type of Pressure | Differential (can be wet both sides) | | Pressure Ranges | - Unidirectional:
- 0 to 1, 2, 5, 10, 25, 50, 100 psid
- Bi-directional:
- 0 to ±0.5, ±1, ±2.5, ±5, ±10, ±25, ±50 psid
| | Thermal Effects | - Thermal Compensation °F (°C):
- 30 to 150 (-1 to 65)
- %FS/100°F(100°C)max.zero:
- ±2.0 (±3.6)
- %FS/100°F(100°C)max.span:
- ±2.0 (±3.6)
| | Media | Gases or liquids compatible with 300 series and 17-4PH stainless steel, and Viton® "O" ring. (Hydrogen not recommended for use with 17-4 PH stainless steel.) *Viton® is a registered trademark of DuPont Dow Elastomers | 3-Valve Manifold Assembly Specifications | 
| | | Manifold Block | Brass | | Valves | V1 for connection to +port
V2 for connection to -port
V3 for equalizing pressure | | Valve Type | 90º On/Off | | Process Connection | 1/4"-18NPT Internal Thread | | Dimensions | 7.05"W x 6.25"H x 2.16"D | | Weight | 2.5 lbs |
Setra model230 low cost wet/wet differential pressuer Click here for full data sheet Model 230 * Specifications subject to change without notice. If you don't see what you need here, please contact us. |
